Mazda 2 Revolution Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Anyone know how to access the windshield washer tank?
I'm losing water, and its either one of the hoses has come off the pump, or the water tank is cracked, so I need to get in and see what's going on. I have a sinking feeling that the whole front bumper has to come off :(
 

·
Registered
Joined
·
3 Posts
hi, did you fix it? I have the same issue, a leaking windshield washer tank. Dunno if its the tank or the pump, and if it can be worked from the side out instead of removing the bumper.
 

·
Registered
Joined
·
4 Posts
Hello, Removing the front bumper is a 5 minute job. A 10mm socket, a Philips screwdriver and a small pick to lift the tabs on the plastic fasteners.
 

·
Registered
Joined
·
3 Posts
Hello, Removing the front bumper is a 5 minute job. A 10mm socket, a Philips screwdriver and a small pick to lift the tabs on the plastic fasteners.
thanks for replying. I will remove it to check the washer leak and some fresh repaint
 
1 - 4 of 4 Posts
Top