Mazda 2 Revolution Forums banner

Mazda 2 1.4

6111 Views 0 Replies 1 Participant Last post by  Direct Remaps
Hi I've got a Mazda 2 1.4 diesel 2004 I recently changed the ECU sid804 I tried to do a eeprom swap but when the ECU is connected to the car the immo light flashed and car does not start .

I presume the immo data is also stored in the flash that's why it's not started do anyone know if I programme the keys to the new ECU should it start .

New ECU was like for like with matching part number .

1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.