Mazda 2 MZD - Mazda Connect Firmware 74.00.324 NA N or EU N or ADR.

28005 Views 116 Replies 73 Participants Last post by Coco Nut, 3 d ago

ASH8

Discussion Starter · 11 mo ago (Edited)

Plant Car Vehicle Automotive lighting Steering part

NOTE: THERE ARE SOME PEOPLE CHARGING YOU FOR THESE UPDATES IN RUSSIA or UKRAINE, or on eBay or Amazon, I NEVER CHARGE YOU, YOU DO NOT PAY FOR NEW FILES, EVER!

Yes, this Firmware update is for all Mazda 2s with the following Touchscreen as shown above then Yes you can also have the working and 100 % Genuine Mazda Carplay and or Android Auto if you desire.

The Genuine Mazda Firmware part of this I supply to you is all free you just message me the Country and Region you need with your current in car current Version number in use today, I will return you with the correct download link.
To find out what Version is in your Mazda 2 now do the following..
1. Touch Red Round Cog of "SETTINGS" on homescreen.
2. Next top of the screen far right grey Folder of "System".
3. Scroll down screen to "About", touch About.
4. Then touch "Version Information" this will show you current Firmware in use in your car today and the country or region code like EU N, or NA N or 4A N so please also must tell me what this is listed in your return message to me.

Once you have installed latest firmware and used in car, you then must Buy and Install the two sets of Genuine Mazda Parts which is the all new Aux Hub box and all new Cable Set of two cables that fits between existing CMU in dash (behind touchscreen) and new Aux Hub (where SD Card slots in).

You do not have to install new parts if you do not want a working CP/AA. You can just ONLY update to the new and latest Firmware 74.00.324, which gives you the latest updates and a faster to load and use MZD Mazda Connect System.

Please Note: I DO NOT supply or help with any AIO TWEAKS at all, you will need to start a new thread , please do not ask me about AIO Tweaks here, I will not reply.

WARNING ⚠ : DO NOT USE ANY USB FLASH DRIVE LARGER THAN 16GB IN SIZE.

ALSO NOTE: Do not rely on your Mazda Dealer to update your Firmware for Connect as most never will unless you complain of a specific issue or fault.

NOTE: Links to secure new Genuine Connect Firmware WILL NOT ever be posted publicly IN THIS THREAD, they will ONLY be supplied via a Private Message to you.

See less See more

Reactions: 5

1 - 20 of 117 Posts

ASH8

Discussion Starter · #2 · 11 mo ago (Edited)

Tips, Firmware Install instructions in.Pdf are also included with your particular download link.
Even a short how to install firmware video can be supplied if you wish.

74.00.324A EU N updated Nov 10th 2022, the fixes over 74.00.311A are ...

SYMPTOMS

The following symptoms can be improved by the latest software (Ver. 74.00.324A).
Improved symptoms depend on current software versions.

• If the shift lever is operated quickly while displaying CarPlayTM screen, the rear view screen may not return to CarPlayTM screen.

• When the gear position is shifted into P from R, the screen may not return to the previous condition before shifting into R position.

See less See more

Breal28

· #3 · 10 mo ago

Hello can you please send the latest firmware ? It has to be for Europe .
Here is my current version 70.00.100A_EU

truongphuocgiang

· #4 · 9 mo ago

I have already upgraded to firmware 74.00.311
Is there any way to downgrade back to 59.00.xxx or 70.00.xxx.
Thanks all

Dekar

· #5 · 9 mo ago

Hello!
I'm happy owner of Japan mazda demio (2).
I already have version 70.00.367 JP M. Do you have a 74 version for this region?

ASH8

Discussion Starter · #6 · 9 mo ago

Dekar said:
Hello!
I'm happy owner of Japan mazda demio (2).
I already have version 70.00.367 JP M. Do you have a 74 version for this region?

No unfortunately nobody has any JP M Firmware.
Can only install 74.00.311A for NA, EU or 4A N Firmware, but some existing JP M features will not work.

Dekar

· #7 · 9 mo ago

ASH8 said:
No unfortunately nobody has any JP M Firmware.
Can only install 74.00.311A for NA, EU or 4A N Firmware, but some existing JP M features will not work.

It is possible to backup the old firmware before flash new one?
When can I know about JP features? I'm really only few days owner of this car

ASH8

Discussion Starter · #8 · 9 mo ago

No you can not back up existing firmware...

Factory DVR Player if installed.
Japan Navigation will not work and will not work outside of Japan.
Few other minor features (can't remember exactly).

Dekar

· #9 · 9 mo ago

ASH8 said:
No you can not back up existing firmware...

Factory DVR Player if installed.
Japan Navigation will not work and will not work outside of Japan.
Few other minor features (can't remember exactly).

Copy that.
So I'm outside the Japan and It looks like I can't use Japan Navigator...
Could you share to me 74 firmware for EU region?

ASH8

Discussion Starter · #10 · 9 mo ago

See your messages or conversation.

Reactions: 1

RDZ

· #11 · 8 mo ago

Hi ASH8, Thanks for the post!
i would love to have android auto on my mazda, the current OS version is:
56.00.230 EU N

Jay l

· #12 · 8 mo ago

Hey mate,
Great to be connected.
Appreciate if could share 74.00.311 4A N.
Thanks mate.

Jenkitra

· #13 · 8 mo ago

Hello can you please send the latest firmware.
Here is my current version 70.00.100 4A N

aadamoy

· #14 · 8 mo ago

hi, i have the 70.00.335 na n ,can i do it eu version?

Lisc84

· #15 · 8 mo ago

ASH8 said:
See your messages or conversation.

Can I have v74 firmware please
United Kingdom

Lisc84

· #16 · 8 mo ago

ASH8 said:
View attachment 886

Yes, this Firmware update is for all Mazda 2s with the following Touchscreen as shown above then Yes you can also have the working and 100 % Genuine Mazda Carplay and or Android Auto if you desire.

The Genuine Mazda Firmware part of this I supply to you is all free you just message me the Country and Region you need with your current in car current Version number in use today, I will return you with the correct download link.
To find out what Version is in your Mazda 2 now do the following..
1. Touch Red Round Cog of "SETTINGS" on homescreen.
2. Next top of the screen far right grey Folder of "System".
3. Scroll down screen to "About", touch About.
4. Then touch "Version Information" this will show you current Firmware in use in your car today and the country or region code like EU N, or NA N or 4A N so please also must tell me what this is listed in your return message to me.

Once you have installed latest firmware and used in car, you then must Buy and Install the two sets of Genuine Mazda Parts which is the all new Aux Hub box and all new Cable Set of two cables that fits between existing CMU in dash (behind touchscreen) and new Aux Hub (where SD Card slots in).

You do not have to install new parts if you do not want a working CP/AA. You can just ONLY update to the new and latest Firmware 74.00.311A, which gives you the latest updates and a faster to load and use MZD Mazda Connect System.

Please Note: I DO NOT supply or help with any AIO TWEAKS at all, you will need to start a new thread , please do not ask me about AIO Tweaks here, I will not reply.

NOTE: Links to secure new Genuine Connect Firmware WILL NOT ever be posted publicly IN THIS THREAD, they will ONLY be supplied via a Private Message to you.

Can I have v74 firmware please United Kingdom Europe

ASH8

Discussion Starter · #17 · 8 mo ago

You must privately message me for links, click on my Avatar.

Konstantinos

· #18 · 8 mo ago

ASH8 said:
You must privately message me for links, click on my Avatar.

Man I'm new and I cannot message you! Any other way to work this around?

Reactions: 1

Konstantinos

· #19 · 8 mo ago

Man I'm new and I cannot message you! Any other way to work this around?

Reactions: 1

hatsanai2525

· #20 · 8 mo ago

Hi guy
could you please give me a link for download mazda os version 74.00.311
I'm from Thailand my current version is 74.00.210 4A N
Thank you.

1 - 20 of 117 Posts