Mazda 2 Revolution Forums banner

Rear Seat Removal

8748 Views 4 Replies 4 Participants Last post by  Two_green
Hi All,

I would like to know how to remove one if possible, if not both rear seats from this vehicle? Is there a way to remove just the back rest instead of the whole seat?

Thanks
1 - 5 of 5 Posts
Should be a few bolts, no? Make sure you weigh what you take out and report back!
Should be just bolted right into the floor.

I remember i was taking apart my sisters yaris and it was just 4 bolts coming right out of the floor. But i could be wrong.
Hello,

If you look behind the seat, you should see bolts around the edges that bolt right into the seat, and in some cases you will find a mix of hooks and bolts.
Let us know how it goes!


Should be just bolted right into the floor.

I remember i was taking apart my sisters yaris and it was just 4 bolts coming right out of the floor. But i could be wrong.
I doubt the back rest he wants to remove is bolted down to the floor, I think you were referring to the bottom part of the seat.

Best Auto Insurance | Auto Protection Today | FREE Trade-In Quote


The seats do fold, so i dont think it would be hooked into anything ans should be just one whole seat assembly. Since there are no bolsters in the rear. Also there is no C pillar frame to hook into. Also since it a hatch, what do you need with all that room?
See less See more
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top